117
Note: Please write down the IPv4 address previously entered as it may be needed after
you are done with streaming or recording.
The NVS-31 should now be connected with an IP address of 192.168.1.60.
If the NVS-31 still cannot connect, simply restore the NVS-31 to the factory defaults.
-
Turn off the switcher.
-
Push the
Record and Stream
buttons simultaneously while turning on the switcher’s
power.
-
Wait for about five seconds and release the button push as soon as you see the
RECORD
and
STREAM
button LEDs light up.
-
Make sure no other devices are connected to the LAN (wired or wireless) because
this may result in IP conflicts.
Login the NVS-31 via a web browser.
-
Default user name is
admin
-
Default password is
000000
Click the “
System
” tab then on the system page, enter network settings such as static IP
and default gateway. Make sure that the default gateway matches your connected
network and no device shares the same IP as the NVS-31.
For example, if your router’s default gateway IP is 10.10.1.1, then in the default gateway
field, you should also enter 10.10.1.1. Then set the IP address of the NVS-31 to 10.10.1.X,
which can range from 10.10.1.2 to 10.10.1.255. Pick an unused IP address.
Summary of Contents for HS-3200
