Datavideo HS-3200, Instruction Manual

Page: 160 / 168

160
Appendix 4 Firmware Update
Datavideo usually releases new firmware containing new features or reported bug fixes
from time to time. Customers can either download the HS-3200 firmware as they wish or
contact their local dealer or reseller for assistance.
This section outlines the firmware upgrade process which should take approximately 1 hour
20 minutes to complete .
The existing HS-3200 settings should persist through the firmware upgrade process, which
should not be interrupted once started as this could result in a non-responsive unit.
Switcher
Successful firmware upgrade on HS-3200 requires:

PC or laptop

USB drive

Access to the Internet for software download
Steps to update the HS-3200 firmware:
1. Download the latest firmware and the update tool from the path below.
www.datavideo.com

products

Switchers

HS-3200

Downloads

Latest
Firmware
2. Decompress the downloaded files.
3. Insert the USB drive into the PC or laptop and format the drive to FAT or FAT32 system.
Save the latest firmware on the drive.
4. Remove the USB drive from the PC or laptop.
5. Insert the USB drive into the F/W Upgrade port at the rear of the HS-3200 switcher.
6. Press the MENU button on the HS-3200 control panel to open the OSD menu.
7. At the bottom of the Main Menu , enter the SETUP sub menu.
8. Under the Software option, select “ Upgrade ” and press the ENTER button to confirm.
9. If you see “ Upgrade ” against a red background, it means the switcher is being updated.
10. When you see red turned to green, it means the firmware upgrade is successful.
11. Reboot the HS-3200 switcher to complete the upgrade.