Datavideo HS-3200, Instruction Manual

Page: 99 / 168

99
On the HS-3200 Control Panel / Keyboard
there are eight
KEYER keys. These are
labelled Program and Preview. The upper
KEYER keys relate to activating Picture-In-
Picture images on the Program outputs.
The lower
KEYER keys relate to activating
Picture-In-Picture images on the Multi-
view or Preview outputs. Before activating
Picture-In-Picture images on the output image, you should first set these KEYER keys to PIP
mode.
Assigning a video source to a PIP window
On the Keyer sub menu you can assign a selected input to the chosen PIP video layer.
1. Open the Keyer sub menu and in the Keyer Ctrl option, set Key 1 to the desired Key
( Luma , Chroma and Linear ) and PIP mode as shown below.
Keyer Keyer Key 1
Keyer Ctrl Luma PIP Opac 100%
Lift 0% Gain 1.0 Invert Off
Key Source Input 1 Fill Black
Mask Left 0% Right 0%
Top 0% Bot 0%
2. In the Key Source option, assign an input source.
3. Activate PIP window on the Preview or Program output by pressing Key 1 PVW or Key 1
PGM button so that you can adjust the PIP window while viewing the changes made.
4. Open the P-in-P sub menu and adjust the PIP window settings ( positions , border , shade
matte and crop ). For descriptions of the parameters, refer to the section on P-In-P for
more details.
P-in-P Keyer Key 1 Fine Normal
Position X 20% Y 10% Size 40%
Border Normal
Luma 100% Sat 80% Hue 0
Width 2% Soft 0% Opac 100%
Shade Matte Luma 100% Sat 80% Hue 60
Shade Soft 2% Shade Pos 50 Direction 35
Crop Left 0% Right 0% Size 0%
Top 0% Bot 0% Soft 0%