Datavideo HS-3200, Instruction Manual

Page: 74 / 168

74
MIX Button
The MIX button is selected when a dissolve or fade transition between the
selected Program and Preset sources is required. This MIX transition is
produced by then moving the T-Bar manually or by pressing the AUTO TRANS
button. To configure the mix transition time, open the OSD menu, then the
Start menu, and modify the M/E value accordingly.
Program View
Before Transition
Transition in Progress
(MIX Effect)
Program View
After Transition
WIPE/DVE Button
The WIPE/DVE button is selected when a 2D wipe or a 3D DVE transition
between the selected Program and Preset sources is required. This WIPE or DVE
transition effect is produced by then moving the
T-Bar manually or by pressing
the AUTO button. Select 2D WIPE in OSD menu

Start

WIPE Effects

WIPE . Select 3D WIPE by pressing DVE 1/2/3 buttons.
Program View
Before Transition
Transition in Progress
(WIPE Effect)
Program View
After Transition
Clip Button
Press the Clip button to enable the Clip (Stinger) transition mode.
The Stinger Transition Effect is basically an animated effect added during
transition of two video sources. The animated effect is generated by a clip file
which consists of a series of sequential files in bmp/jpg/png/pic formats. The Stinger
transition is produced by then moving the T-Bar manually or by pressing the AUTO TRANS
button. See Section 5.4 for instructions on loading the clip on the switcher.
FTB Button
The FTB button (Fade To Black) fades the current video program source to
black. When pressed again it acts in reverse from complete black to the