Datavideo HS-3200, Instruction Manual

Page: 163 / 168

163
Appendix 5 Frequently-Asked Questions
This section describes problems that you may encounter while using the HS-3200. If you
have any questions, please refer to related sections and follow all suggested solutions. If
problem still exists, please contact your distributor or the service center.
No. Problems Solutions
1 Grabbed picture is distorted or
contains noise. Successfully grabbed pictures to Still 1
and 2 will be distorted or appear noisy if
switched to different video standards.
2 Loaded still picture contains noise. Still pictures will be distorted or appear
noisy if switched to different video
standards.
3 What kind of files can be saved on the
HS-3200 and is there any limitation? You can save still pictures, user memory,
clips and logos to the HS-3200’s memory
but the maximum storage space is
limited to 1000 frames.
4 One of the FLEX sources is not
displayed in the FLEX windows. The maximum Flex
TM
output size is
1080p full screen. If exceeded, one Flex
source will not be displayed.
5 HS-3200 is unable to save the last
settings into its nonvolatile memory. The Last Memory feature will be
enabled upon entering and exiting the
OSD menu. Only shut down the machine
after 10 seconds after the OSD menu is
closed (It takes 10 seconds for the HS-
3200 to finish saving the last settings to
the memory).