Datavideo HS-3200, Instruction Manual

Page: 118 / 168

118

DHCP
：
Disable

Static IP
：
X.X.X.Y
；
the first three decimal numbers must be the same as your router or
switch. The number Y must be a number not used by any devices connected to the
network.

Subnet Mask
：
255.255.255.0

Default Gateway
：
Z.Z.Z.Z
；
same as the gateway IP of your router or switch.
Note: Some router may require special gateway IP setting; instead of the standard
192.168.1.1. Therefore, you should check the network properties on the PC before
switching to the fixed IP mode.
For example, some routers have a gateway IP of 192.168.1.254 and as a result, the default
gateway and primary DNS fields on the NVS-31 must also be configured to 192.168.1.254.

Primary DNS: Same as the default gateway IP, which, if causing issues, can be changed to
8.8.8.8 or 8.8.8.4 (Public DNS provided by Google).

Click the “ Submit ” button to save the network settings.

Reconnect the PC and the NVS-31 to the network.

Restore the PC’s original network settings.

Shut down the HS-3200; wait for approximately five seconds before turning the HS-3200
back ON.

You should be able to access the NVS-31 through the fixed IP address.
Advanced Troubleshooting
If you still are unable to connect, please try the following:

Use the ARP table to search for the encoder’s MAC address; the device’s MAC address is
on the print label at the bottom of your HS switcher.

MAC address starts with 00:07:36:03:xx:xx .
-
Switcher’s MAC address starts with 00:07:36:07:xx:xx (HS-3200 and HS-3200 only)