Datavideo HS-3200, Instruction Manual

Page: 119 / 168

119

On the command prompt (terminal on MAC OS), enter " arp -a " then press enter key to
display an ARP list. See if the NVS-31 is successfully connected to the network.

Execute services.msc
，
and on the right column of the “ Services” window, locate “ DHCP
Client” then click “ Restart” .

On the command prompt, enter ipconfig/flushdns followed by ipconfig/release and
ipconfig/renew.
7.2 Web User Interface
By now, we have obtained the IP addresses of the PC and the NVS-31. Enter the NVS-31’s IP
address into the address bar of a browser then hit the
ENTER button. Login by entering the
user name as well as the password into a pop-up dialogue box as shown below.
Username: admin
Password: 000000
Click OK to login. Once logged in, the
first page that appears will be the
Status page.
Status
You will see the Status page immediately after logging into the NVS-31 web UI. On the
Status page, you will be able to view the Operation Mode , Video Resolution , Stream
Settings (RTSP/RTMP(S)/HLS/SRT/TS), Record Settings , Record Media and Messages .