Datalogic QuickScan Lite QW2400 Product Reference Manual Download Page 121

Page: 121 / 288

1D Symbologies

Enter/Exit Programming Mode

Product Reference Guide

127

Add-Ons

The following features apply to optional add-ons.

Optional Add-ons

The scanner can be enabled to optionally read the following add-ons (supple-

mentals):

• P2

• P5

NOTE

Contact Customer Support for advanced programming of
optional and conditional add-ons.

NOTE

If a UPC/EAN base label and a an add-on are both decoded, the
scanner will transmit the base label and add-on. If a UPC/EAN

base label is decoded without an add-on, the base label will be
transmitted without an add-on.

Conditional add-on settings (if enabled) are considered by the
scanner before optional add-on settings.

$CADO200



Optional Add-Ons = Disable P2

$CADO201



Optional Add-Ons = Enable P2

$CADO500



Optional Add-Ons = Disable P5

$CADO501



Optional Add-Ons = Enable P5

DEFAULT

Summary of Contents for QuickScan Lite QW2400

































































































































































































































































































Search results

Summary of Contents for QuickScan Lite QW2400

Reviews:

Related manuals for QuickScan Lite QW2400

Brands by name

Popular brands

Datalogic QuickScan Lite QW2400, Product Reference Manual

Search results

Summary of Contents for QuickScan Lite QW2400

Reviews:

Related manuals for QuickScan Lite QW2400

Brands by name

Popular brands