Datalogic QuickScan Lite QW2400, Product Reference Manual

Page: 29 / 288

RS-232 ONLY Interface Enter/Exit Programming Mode
Product Reference Guide 21
RS-232 ONLY Interface
Use the programming bar codes in this chapter if modifications to the standard
RS-232 interface settings are necessary to meet your system’s requirements.
Additional settings which apply to both the RS-232 and USB interfaces are
available in Chapter 5, RS-232/USB-COM Interfaces .
RS-232 Standard Factory Settings
Reference Appendix B, for a listing of standard factory settings.
Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the scan-
ner's baud rate to match the baud rate setting of the host device. With an
improper baud rate setting, data may not reach the host correctly.
B
AUD
R
ATE
on page 21
P
ARITY
on page 23
D
ATA
B
ITS
on page 22
H
ANDSHAKING
C
ONTROL
on page 24
D
ATA
B
ITS
on page 22
$CR2BA00 
Baud Rate = 1200
$CR2BA01 
Baud Rate = 2400
$CR2BA02 
Baud Rate = 4800
$CR2BA03 
Baud Rate = 9600
DEFAULT