Datalogic QuickScan Lite QW2400, Product Reference Manual

Page: 105 / 288

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 97
Pick Mode
Specifies the ability of the reader to decode labels only when they are close to
the center of the aiming pattern. This allows the reader to accurately target
labels when they are placed close together, such as on a pick sheet.
The Pick Mode can be enabled only in Trigger Single Scan Mode. So, when the
trigger is pulled the aiming pattern immediately appears allowing the user to
point the barcode. After a while the reader's illumination starts and the reader
can decode the aimed label.
NOTE
This feature is not compatible with Multiple Labels Reading in a Volume.
Pick Mode = Disable
Pick Mode = Enable
DEFAULT
$CSNPM00(CR)
$CSNPM01(CR)