Symbology Selection
Enter/Exit Programming Mode
Product Reference Guide
217
PDF417 Set Length 1
Specifies one of the bar code lengths for
PDF417 Length Control on page 216
Length 1 is the minimum label length if in
Variable Length
Mode, or the first
fixed length if in Fixed Length Mode. Length includes the bar code’s data char-
acters only. Characters can be set from 0001 to 2,710 characters (pad with
zeroes) in increments of 01. Any value greater than 2,710 will be considered to
be 2,710.
See
for detailed instructions on setting this feature.
Select PDF417 Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CP4L1
~
DEFAULT
0001 = Length 1 is 1 Character
Summary of Contents for QuickScan Lite QW2400
