Datalogic QuickScan Lite QW2400, Product Reference Manual

Page: 35 / 288

RS-232/USB-COM Interfaces Enter/Exit Programming Mode
Product Reference Guide 27
Beep On ASCII BEL
When this parameter is enabled, the scanner issues a beep when a <BEL> char-
acter is detected on the RS-232 serial line. <BEL> is issued to gain a user's
attention to an illegal entry or other important event.
Beep On Not on File
This option enables/disables the action of the scanner to sound a three beep
sequence upon receiving a Not-On-File (NOF) host command.
$CR2BB00

Beep On ASCII BEL = Disable
$CR2BB01 
Beep On ASCII BEL = Enable
DEFAULT
$CBPNF00

Beep On Not On File = Disable
$CBPNF01 
Beep On Not On File = Enable
DEFAULT