Datalogic QuickScan Lite QW2400, Product Reference Manual

Page: 176 / 288

Enter/Exit Programming Mode Industrial 2 of 5
182 QuickScan™ Lite QW2400
Industrial 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for Industrial 2 of 5 Length
Control on page 180 . Length 2 is the maximum label length if in Variable
Length on page 140 Mode, or the second fixed length if in Fixed Length on
page 140 Mode. Length includes the bar code’s check, data, and full-ASCII shift
characters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 259 for
more detailed programming instructions.
$CU2L2
Select Industrial 2 of 5 Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters