Datakom D-500 MK2, User Manual

Page: 115 / 197

D-500 MK2 User Manual Firmware V-6.3
- 115 -
Parameter Definition Unit Min Max Factory
Set
Description
Service-2 Engine Hours hours 0 5000 250
The SERVICE REQUEST led indicator
will turn on after this quantity of engine
hours from the last service. If the period
is set to ‘0’ no
SERVICE REQUEST will
be generated depending on service-2
engine hours.
Service-2 Period month 0 24 6
The SERVICE REQUEST led indicator
will turn on after this amount of time
from the last service. If the period is set
to ‘0’ no
SERVICE REQUEST will be
indicated depending on Service-2
Period.
Service-2 Alarm Level - 0 3 0
0: no action
1: shutdown alarm
2: loaddump alarm
3: warning
Service-3 Engine Hours hours 0 5000 250
The SERVICE REQUEST led indicator
will turn on after this quantity of engine
hours from the last service. If the period
is set to ‘0’ no
SERVICE REQUEST will
be generated depending on service-3
engine hours.
Service-3 Period month 0 24 6
The SERVICE REQUEST led indicator
will turn on after this amount of time
from the last service. If the period is set
to ‘0’ no
SERVICE REQUEST will be
indicated depending on Service-3
Period.
Service-3 Alarm Level - 0 3 0
0: no action
1: shutdown alarm
2: loaddump alarm
3: warning
J1939 Enable - 0 1 0
0: The J1939 port is inoperative.
1: The analog measurements (oil, temp,
and rpm) are picked up from the ECU. If
the ECU communication is lost, then the
engine will be stopped.
17.3. ENGINE PARAMETERS GROUP (continued)