SR200 & SR300 Printer User Guide
21
•
Specify the number of retransfer panels used to print one side of a card. UV and
YMCK inks cannot be transferred in the same area on the same retransfer panel, so
this setting determines what data will print. The following table shows the result for
data outside the MAC address area and data overlapping the MAC address area.
The driver compares printing data for each type of ink to determine whether there are any
overlapping pixels. Priority is given to the “Print in 2 panels” setting.
Priority of Data
•
The MAC address data is always printed using the UV panel. The area can knock
out other printing.
•
Image files are processed in the order registered and shown in the File Information
area. Newer data will replace older data if it overlaps.
•
Extracted text has higher priority than an image file and prints on top of any image.
•
Page Split overrides extracted data and any image files.
Printing Data
Setting for Number of Retransfer Film Panels to Use
1 Panel
Auto
2 Panels
Printing data that
overlaps with the
UV ink data outside
the MAC address
printing area
None
Print in 1 panel
Print in 1 panel
Print in 2 panels
YMC Ink
Print in 1 panel
(The YMC ink is not
printed in areas
where it overlaps
with the UV ink.)
Print in 2 panels
Print in 2 panels
K Ink
Print in 1 panel
(The UV ink is not
printed in areas
where it overlaps
with the K ink.)
Print in 2 panels
Print in 2 panels
Printing data inside
the MAC address
area
None
Print in 1 panel
Print in 2 panels
YMC Ink
Print in 1 panel
(Does not print
using the YMCK
ink.)
Print in 2 panels
Print in 2 panels
K Ink
Print in 2 panels
Print in 2 panels
UV Ink
Prints the MAC address only
