36
SR200 & SR300 Printer User Guide
0102D300
0102D400
0102D500
The printer is busy.
—
0102DA00
Preheating is in progress.
Wait until preheating is complete.
0102DB00
Printer is initializing.
Wait until initialization is complete.
0102DC00
Offline testing is in progress.
Wait until the offline test is complete.
Cleaning is in progress.
Wait until cleaning is complete.
0102DD00
Operation panel is currently in use.
—
The printer is in the transport mode.
Cancel the transport mode.
0102DE00
The firmware cannot be downloaded.
Set the printer to the download mode.
0102FD00
The printer is in the Power Saving mode.
Resetting the printer temporarily cancels the Power
Saving mode.
The printer resets automatically when the printer
driver is used to start printing.
0102FE00
Password authentication is not
complete.
—
0102***
The printer is not ready.
—
01039000
Failure occurred during card loading.
1 Switch off the printer power.
2 See
“Hopper jam” on page 58
to remove the
card.
3 Switch on the printer power.
01039100
Card jam near the card turn over unit.
1 Switch off the printer power.
2 See
“Turnover jam” on page 60
to remove the
card.
3 Switch on the printer power.
01039200
Card jam near the magnetic encoder.
1 Switch off the printer power.
2 See
“Turnover jam” on page 60
to remove the
card.
3 Switch on the printer power.
01039300
Card jam near the card feed roller.
1 Switch off the printer power.
2 See
“Retransfer section jam” on page 61
to
remove the card.
3 Switch on the printer power.
01039400
Card jam near the card outlet.
1 Switch off the printer power.
2 See
“Retransfer section jam” on page 61
to
remove the card.
3 Switch on the printer power.
Error Code
Displayed Message
Solution