SR200 & SR300 Printer User Guide
31
Retransfer tab
The Retransfer tab shows:
•
A front-side matrix and a back-side matrix for
setting the retransfer speed and temperature.
Click a square to choose the setting. Click the
Update button to send the settings to the
printer.
•
The card type, set on the Media Setting tab.
•
The Refresh button which displays the current
printer data.
•
Speed settings for transferring UV ink to the
card.
Tips for success
•
The transfer power to the card gets stronger
towards the upper right, but the card becomes more distorted due to the heat.
•
Changing the retransfer temperature on one card side also affects the other side.
•
The recommended range of values changes with the Card Type setting.
•
Make sample cards to verify settings before using new settings.
Bend Remedy tab
The printer is available with a bend remedy option. Single-sided printing can cause the
card to warp, depending on the type of cards you use.
If the option is installed, the tab shows:
•
A matrix for setting the bend remedy time and
temperature. Click a square to choose the
setting. Click the Update button to send the
settings to the printer.
•
The card type, set on the Media Setting tab.
Tips for success
•
The Card Type is blank if the Bend Remedy
option is not installed in the printer.
•
Bend remedy is effective for single side
printing. For double side printing, choose the
Disable
button.
•
When you change to Disable and the Bend
Remedy option is installed, the printer goes into
Preheat
state for about 10 minutes
while the roller temperature drops. Wait until the printer state changes to
Ready
.
•
The side of the card where the bend remedy is performed can become faded.
•
Make sample cards to verify settings before using the new settings.