SR200 & SR300 Printer User Guide
61
Retransfer section jam
If a card jams in the retransfer section, “Jam (Retransfer)” is displayed on the
LCD panel. To remove the jammed card:
1
Power off the printer.
2
Open the printer door.
3
Press the retransfer film cartridge eject button and remove the
retransfer film cartridge.
The card might be stuck to the film. Watch
carefully to avoid jamming the card when
removing the retransfer film cartridge.
If “Please Close Door” appears, the retransfer
film cartridge is stuck. Push it back into the
printer, close the door, and return to step 3.
4
Remove the card from the printer or from the
retransfer film cartridge.
5
If the card is stuck to the right of the heat roller,
see
“Transfer jam” on page 59
.
6
If the card is stuck near the
Retransfer heat roller, use the
supplied tweezers to remove the
card, as shown.
7
Replace the retransfer film
cartridge and close the printer
door.
8
Power on the printer.
9
Press Reset. “Card Jam
Removed?” appears on the
printer LCD panel.
Do not initialize the printer with
the card inside.
— Press Yes only if the card is
removed.
— Press No if the card remains
inside the printer.
10
Initialize the supplies as
described in
“Initialize the ink ribbon and retransfer film” on page 14
.
Tips – Retransfer jam
•
Some internal parts may
be hot. Be careful when
removing a jammed card.
•
The card might be very
hot. Use the supplied
tweezers to remove
cards from the printer.
•
Do not drop the card
inside the printer.
