DataCard SR200 User Manual Download | Manualshive

Page: 2 / 85

background image

ii

SR200 & SR300 Printer User Guide

Please note and heed the WARNING and CAUTION labels that have been placed on the equipment for your
safety. Please do not attempt to operate or repair this equipment without adequate training. See “Safety” on
page vi for the basic safety tips to ensure safe operation and maintenance of this equipment.

Regulatory compliance

These Datacard Group products conform to regulatory requirements as specified in North America, Europe, and
Asia. See

“

“Regulatory compliance” on page 80 for more information.

Trademark acknowledgments

Datacard and ID Works are registered trademarks of DataCard Corporation in the United States and/or other
countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective owners.
Names and logos on sample cards are fictitious. Any similarity to actual names, trademarks, or trade names in
coincidental.

Proprietary Notice

The design and information contained in these materials are protected by US and international copyright laws.
This product includes software developed for the OpenSSL Project for use in the OpenSSL Toolkit. (http://
www.openssl.org/)
This product includes cryptographic software written by Eric Young ([email protected]).
This product includes software written by Tim Hudson ([email protected]).

Revision Log:

SR200 & SR300 Printer User Guide

Revision

Date

Affected Pages

Description of Changes

A

June 2010

All

First Release of SR200 & SR300

«
1
2
3
4
...
»

Summary of Contents for SR200






















































































Reviews:

No comments

Related manuals for SR200

Brand: GBC Pages: 49

Brand: Banner American Pages: 16

Brand: Brady Pages: 6

Brand: Argo Pages: 7

Brand: Argo Pages: 9

Brand: Argo Pages: 9

Brand: Argo Pages: 11

Brand: Argo Pages: 10

Brand: Argo Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands