![background image](http://html.mh-extra.com/html/datacard/imagecard-iv/imagecard-iv_user-manual_511444115.webp)
Maintaining the printer
7-15
User’s Guide for the ImageCard® IV Printer
Figure 7-12: Clean the heated roller
5
Replace the supply cartridge.
6
Close the cover of the printer and press to latch it. Lock the printer if needed.
7
Power on the printer to resume card production.
8
Repeat if needed.
♦
Replacing the printhead cartridge
The printhead in the ImageCard IV printer has a direct effect on print quality. The
printhead is subject to wear, which reduces card quality. If cleaning the printhead does
not restore card quality, replace the printhead cartridge.
Contact your service provider before replacing the printhead cartridge. The
service provider might recommend additional steps to take, depending on your
situation, to restore print quality.
Tools to use:
•
Electrostatic discharge (ESD) strap
Remove the printhead cartridge
1
Make sure the power for the printer is off.
You can damage the printhead if you do not power off the printer.
2
Remove the power cord from the power receptacle.
Unlock the printer if needed.
iciv006u
1
2
i
i
Summary of Contents for ImageCard IV
