manualshive.com logo in svg

DataCard ImageCard IV, User Manual, Page: 73 / 204

Share
Download
DataCard ImageCard IV User Manual Download Page 73

Using the printer

5-9

User’s Guide for the ImageCard® IV Printer

the printer is busy. For a directly networked printer, the print server manages jobs 
from any PCs that send jobs to the printer.

♦

 

Operating tips

•

For the most current information about messages, see the online help for each 
message.

•

Whenever you are encoding magnetic stripe data or programming smart cards, be 
sure to handle incomplete cards according to your policy for handling the 
confidential data that might be on the card.

•

Used print ribbon contains negative images of data printed on cards. Be sure to 
handle used print ribbon according to your policy for handling the confidential data 
that might be on the card.

While making cards…

The following situations might occur during normal card production.

•

The cleaning mechanism might run right after the card reaches the print station. 
The cleaning mechanism operates automatically, based on the interval you select 
in the printer driver. It does not slow printer operation.

•

Card processing pauses while the topcoat or overlay station heats to operating 
temperature. The topcoat or overlay stations include heated rollers that have 
specific temperature ranges in which they operate. At times, the heated roller 
might be warming up when a card is ready to have topcoat or overlay applied. 
That card will wait in the station.

•

Card processing pauses while the printhead returns to operating temperature. At 
times, the printhead might be warming up when a card is ready to print colors, 
black, or topcoat. That card will wait in the station.

•

Messages from the printer are displayed on the PC.

Card production rate

The following factors can affect card production rate:

•

Quality of the card stock and printed cards 

•

Card features and shade count

•

Not interrupting card printing

PC resources, such as processor speed and memory, can also affect the speed of 

processing for individual cards.

Card quality tips

Several factors can affect the quality of the cards printed by the ImageCard IV printer. 
Production rates lower when cards must be made again because of problems with 
quality.

E

Summary of Contents for ImageCard IV













































































































































































































Reviews:

No comments