![background image](http://html.mh-extra.com/html/datacard/imagecard-iv/imagecard-iv_user-manual_511444054.webp)
4-8
Loading supplies
User’s Guide for the ImageCard® IV Printer
Figure 4-6: Load cleaning tape in the cartridge
12 Press down on the take-up spool and turn slightly (if needed) until the spool fully
covers the spool holder ribs (step 4 in
Figure 4-6
).
Make sure the material winds clockwise
.
13 Pick up the cleaning tape cartridge and turn it over.
14 Turn the take-up knob to remove any slack in the cleaning tape. The cleaning tape
cartridge is ready to be replaced in the printer.
♦
Replacing the cleaning tape cartridge
When replacing the cleaning tape cartridge, begin with the top cover open.
Replace the cleaning tape cartridge
1
Hold the loaded cleaning tape cartridge over the cleaning station.
2
Align the cleaning tape cartridge so the cleaning tape spools fit over the cleaning
tape spindles and the glide roller is over its shaft (step 1 in
Figure 4-7
).
iciv180u
2
4
1
3
Empty take-up spool
Full supply roll
Glide roller
E
Summary of Contents for ImageCard IV
