![background image](http://html.mh-extra.com/html/datacard/imagecard-iv/imagecard-iv_user-manual_511444034.webp)
3-10
Setting up the printer
User’s Guide for the ImageCard® IV Printer
Figure 3-10: Set the card thickness
–
If the card cannot move past the separator, turn the card separator knob
clockwise
until the card can slide past the separator.
–
Then, turn the card separator knob clockwise
one-quarter turn to allow for
normal variations in thickness.
5
Check the setting using a few more cards of the desired thickness. Push a card
between the guide rollers, so the edge is past the card separator. Remove your
hand from the card to determine if the setting is correct.
Figure 3-11: Correct card thickness setting
iciv071u
.035 - .055 inch
(.89 - 1.4 mm)
.018 - .028 inch
(.46 - .71 mm)
Card separator knob
Card separator
Guide roller
iciv066u
Card separator
Card
Guide rollers
Summary of Contents for ImageCard IV
