![background image](http://html.mh-extra.com/html/datacard/imagecard-iv/imagecard-iv_user-manual_511444012.webp)
1-6
Overview
User’s Guide for the ImageCard® IV Printer
•
Particle detection
Card stock might have particles embedded in the plastic, which can cause
problems with printing. The particle detector identifies cards with embedded
particles and rejects them.
While the particle detector adapts to smart card chips or other features that might
be on the card, at times a feature (such as a signature panel) might be detected
as a particle. To allow for such features, you can set the particle detection
sensitivity. As you lower the sensitivity, you increase the chance of not detecting
potentially damaging particles.
•
Magnetic stripe encoding module
The magnetic stripe encoding module is installed in-line with the print operation. It
encodes data on the magnetic stripe and then verifies the data before the
graphics and photos are printed on the card.
•
Smart card module
The smart card module initializes and programs the smart card chip on a card.
The smart card application on the PC uses the application programming interface
(API) to request that a card be positioned in the smart card module. After the card
is in position, the smart card application handles all data sent to the smart card
chip through a separate serial cable. When that process is successfully
completed, personalization continues and the driver manages communication and
processing. The ImageCard IV printer can have a contact smart card module, a
contactless (radio) module, or both modules. It can also have a contact station
used with an external coupler.
•
Overlay station
The overlay station applies a protective, die-cut laminate (polyester patch) to the
card after it has been personalized. The laminate provides a durable and long-
lasting protective surface to the card.
•
Topcoat station
The topcoat station applies a protective film, with or without a hologram, to a card
without a printed topcoat. Topcoats provide protection to the printed card surface.
Holographic topcoat applies a tamper-evident image to the card to enhance
security.
See
“Supplies and cards” on page B-1
for information about the overlay and topcoat
supplies available.
Summary of Contents for ImageCard IV
