2-4
Getting started
User’s Guide for the ImageCard® IV Printer
Environmental requirements
The ImageCard IV printer requires the following environmental conditions for optimal
operation:
•
Operating relative humidity: 20% to 80% non-condensing
•
Operating temperature range: 55° F to 80° F (13° C to 27° C)
If you store the ImageCard IV printer, provide an environment with the following
conditions:
•
Storage relative humidity: 20% to 80% non-condensing
•
Storage temperature range: 0° F to 100° F (-17.8° C to 37.8° C)
Unpacking the printer
After you select a location that meets the site requirements for the ImageCard IV
printer, unpack the printer.
You need a cutting device to unpack the printer.
Make sure you have two or more people to assist with unpacking the printer. Two
people can lift the printer while one or more people assist with removing packaging.
Unpack the printer
1
Place the shipping carton on the floor or other firm level surface.
2
Open the end marked “Open This End” by cutting the tape on the shipping carton.
3
Open the inside flap of the shipping carton.
Figure 1-2: Remove the printer from the shipping carton
i
3
2
1
4
Summary of Contents for ImageCard IV
