manualshive.com logo in svg

DataCard ImageCard IV, User Manual, Page: 38 / 204

Share
Download
DataCard ImageCard IV User Manual Download Page 38

3-14

Setting up the printer

                    

User’s Guide for the ImageCard® IV Printer

22 From the User Information page, click “View Release Notes” if you want to view 

detailed information about the printer driver installed. The WordPad application 
opens and displays the release notes. Click the Close or Exit button when you are 
done viewing release notes.

23 From the User Information page, click “e-Guide for ImageCard IV Printers.” The 

SmartDriver e-Guide Installation dialog box opens.

24 Click OK to start the self-extraction (zip) program. The WinZip . . . dialog box 

appears.

25 Use the default path to extract the files (or specify another location). Click Unzip to 

extract files and then click OK to start the e-Guide installation program.

26 The installation program detects whether the Adobe Acrobat Reader program is 

installed on the PC. If it is not, the installation program reminds you to install it. 
Continue with these steps and be sure to perform step 28. 

Click OK to close the message box if it appears.

27 The program installs the files for the e-Guide for ImageCard IV Printers. Click 

Finish when it is complete.

28 If a message appeared as described in step 26, click “Acrobat Reader” on the 

User Information page. Follow the prompts to install Acrobat Reader.

29 If you will be using more than one type of printer on this PC, install e-Guides for 

each printer type, following steps 20 through 25. 

The SmartDriver supports the Magna Platinum series printer, the SP35 card 
printer, Magna Class printer with AIT, the Select Class printer with AIT, the Select 
Platinum series printer, and the ImageCard IV printer. 

30 Click Exit to close the Datacard Group program, and then remove the CD-ROM 

from the PC’s drive.

31 Driver installation is complete. Go to 

“Changing required printer settings” on 

page 3-17

, and then print a sample card to verify driver installation. See 

“Printing 

sample cards” on page 3-18

.

♦

Install the printer driver to a parallel port on Windows ME, 98 
or NT

1

Close all applications. Do not close Windows.

2

Make sure the printer is connected to the PC.

3

Make sure the printer is powered on.

For Windows NT, log in as the Administrator when you install the printer 

driver.

4

With Windows running, insert the CD-ROM in the PC's drive. The Datacard Group 
window opens automatically.

E

Summary of Contents for ImageCard IV













































































































































































































Reviews:

No comments