DataCard ImageCard IV, User Manual, Page: 55 / 204

Loading supplies
4-9
User’s Guide for the ImageCard® IV Printer
Figure 4-7: Replace the cleaning tape cartridge
3 Lower the cleaning tape cartridge into the printer.
4 Press down firmly to seat the cleaning tape cartridge in the printer.
5 Press down on the lock (step 2 in Figure 4-7 ) to secure the cleaning tape cartridge
in the printer.
On some cartridges, press down and turn the lock clockwise to lock the
cleaning tape cartridge.
6 Turn the take-up knob counterclockwise to remove any slack from the tape.
7 Close the cover of the printer and press to latch it. If the printer has a lock, lock the
printer.
♦
Changing the laminate in the overlay station
If your printer includes an optional overlay station, the station uses laminate supply
material.
This section describes the three steps of changing the overlay material:
•
Remove the supply cartridge
•
Load material in the cartridge
•
Replace the supply cartridge
If you change the type of supply material you use, see “Changing operational
settings” on page 6-15 for more information.
iciv040u
1
1
2
Take-up knob
Glide roller
Glide roller shaft
E
E