3 Parameter Description
3.1 Parameter Selection
Parameters for the adjustable frequency drive are grouped into various parameter groups for easy selection of the correct parameters for optimized
operation of the adjustable frequency drive.
The vast majority of VLT HVAC Drive applications can be programmed using the Quick Menu button and selecting the parameters under Quick Set-up
and Function Set-ups.
Descriptions and default settings of parameters may be found under the section Parameter Lists at the back of this manual.
0-xx Operation/Display
10-xx CAN Serial Communication Bus
1-xx Load/Motor
11-xx LonWorks
2-xx Brakes
13-xx Smart Logic Controller
3-xx Reference/Ramps
14-xx Special Functions
4-xx Limits/ Warnings
15-xx Adjustable Frequency Drive Information
5-xx Digital In/Out
16-xx Data Readouts
6-xx Analog In/Out
18-xx Info & Readouts
8-xx Comm. and Options
20-xx Adjustable Frequency Drive Closed-loop
9-xx Profibus
21-xx Ext. Closed-loop
22-xx Application Functions
23-xx Time Based Functions
24-xx Application Functions 2
25-xx
Cascade
Controller
26-xx Analog I/O Option MCB 109
3.2 Main Menu - Operation and Display - Group 0
3.2.1 0-** Operation / Display
Parameters related to the fundamental functions of the adjustable frequency drive, function of the LCP buttons and configuration of the LCP display.
3.2.2 0-0* Basic Settings
Parameter group for basic adjustable frequency drive settings.
VLT
®
HVAC Drive Programming Guide
3 Parameter Description
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3-1
3