manualshive.com logo in svg

Danfoss VLT HVAC Series, Programming Manual, Page: 5 / 338

Share
Download
Danfoss VLT HVAC Series Programming Manual Download Page 5

2 How to Program

2.1 Local Control Panel 

2.1.1 How to operate the graphical LCP (GLCP) 

The following instructions are valid for the GLCP (LCP 102).

The GLCP is divided into four functional groups:

1.

Graphical display with status lines.

2.

Menu keys and indicator lights (LEDs) - selecting mode, changing parameters and switching between display functions.

3.

Navigation keys and indicator lights (LEDs).

4.

Operation keys and indicator lights (LEDs).

Graphical display:

The LCD display is back lit with a total of 6 alpha-numeric lines. All data is displayed on the LCP which can show up to five operating variables while in
[Status] mode.

Display lines:

a.

Status line:

 Status messages displaying icons and graphics.

b.

Line 1-2: 

Operator data lines displaying data and variables de-

fined or chosen by the user. By pressing the [Status] key, up to
one extra line can be added.

c.

Status line:

 Status messages displaying text.

VLT

®

 HVAC Drive Programming Guide

2 How to Program

MG.11.C6.22 - VLT

®

 is a registered Danfoss trademark

2-1

  2

Summary of Contents for VLT HVAC Series



















































































































































































































































































































































Reviews:

No comments