9-94 Changed parameters (5)
Array [116]
No LCP Address
Read only
Range:
Function:
0 N/A*
[0 - 9999 N/A]
This parameter displays a list of all the adjustable frequency drive parameters deviating from default
setting.
3.11 Main Menu - CAN Ser. Com. Bus - Group 10
3.11.1 10-** DeviceNet and CAN serial communication bus
Parameter group for DeviceNet CAN serial communication bus parameters.
3.11.2 10-0* Common Settings
Parameter group for configuring common settings for CAN serial communication bus options.
10-00 CAN Protocol
Option:
Function:
[1] *
DeviceNet
View the active CAN protocol.
NOTE!
The options depend on installed option
10-01 Baud Rate Select
Option:
Function:
Select the serial communication bus transmission speed. The selection must correspond to the
transmission speed of the master and the other serial communication bus nodes.
[16]
10 Kbps
[17]
20 Kbps
[18]
50 Kbps
[19]
100 Kbps
[20] *
125 Kbps
[21]
250 Kbps
[22]
500 Kbps
[23]
800 Kbps
[24]
1000 Kbps
10-02 MAC ID
Range:
Function:
63. N/A*
[0 - 63. N/A]
Selection of station address. Every station connected to the same DeviceNet network must have an
unambiguous address.
3 Parameter Description
VLT
®
HVAC Drive Programming Guide
3-110
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3