manualshive.com logo in svg

Danfoss VLT FC 103, Operating

Share
Download
Danfoss VLT FC 103 Operating Download Page 39

1.

2.

a.
b.
c.
d.
e.

>60

>60

e3

0b

u1

46

.1

1

Illustration 13: Recommended Lifting Method

4.10 Combining Multiple Cabinets from a Split Shipment

Procedure

Make sure the cabinets are in the right order and place them side by side. For the proper order, refer to 

3.2 What is an

Enclosed Drive?

.

Attach the cabinets to one another:

Remove the Rittal back cover from each cabinet.
Secure the back side of the cabinets to one another using the back brackets. See 

Illustration 14

.

Secure the front side of the cabinets to one another using the front brackets. See 

Illustration 14

.

Secure the lifting eyelets to the top of the cabinets. See 

Illustration 15

.

Join the grounding bars using the connector piece (see the shaded piece in 

Illustration 16

).

AQ357954340588en-000201 / 130R0881 | 39

Danfoss A/S © 2020.09

Mechanical Installation

VLT® Refrigeration Drive FC 103

Operating Guide

Summary of Contents for VLT FC 103























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands