Decentral Solutions
Programming, FCD
300
■
Display mode
195NA113.10
VAR 2
SETUP
1
STATUS
VAR 1.1 VAR 1.2 VAR 1.3
In normal operation, up to 4 different display data
items can optionally be shown continuously: 1,1,
1,2, 1,3 and 2. The present operation status or
alarms and warnings that have been generated are
displayed in line 2 in the form of a number.
In the event of alarms this is displayed in lines
3 and 4 with explanatory text.
A warning will appear flashing in line 2 with
explanatory text in line 1. The active Setup will
also appear on the display.
The arrow indicates the selected direction of rotation.
Here the variable frequency drive shows that it has
an active reverse signal. The body of the arrow
will disappear if a stop command is given, or if the
output frequency drops below 0.1 Hz.
The bottom line displays the frequency transformer
’
s
status. The scrollbar shows which operating values
can be displayed in lines 1 and 2 in Display mode.
Changes are made using the [+ / -] keys.
Switching between AUTO and HAND modes
By activating the [CHANGE DATA] key in [DISPLAY
MODE] the display will indicate the mode of
the variable frequency drive.
Switch mode by using [+/-] key [HAND...AUTO]
In [HAND] mode the reference can be changed
by [+] or [-] keys.
Operating data
Unit
Resulting reference
[%]
Resulting reference
[unit]
Feedback
[unit]
Output frequency
[Hz]
Output frequency x scaling
[-]
Motor current
[A]
Torque
[%]
Power
[kW]
Power
[HP]
Motor voltage
[V]
DC link voltage
[V]
Thermal load motor
[%]
Thermal load
[%]
Hours run
[hours]
Digital input
[binary]
Pulse input 29
[Hz]
Pulse input 29
[Hz]
Pulse input 33
[Hz]
External reference
[%]
Status word
[hex]
Heatsink temperature
[°C]
Alarm word
[hex]
Control word
[hex]
Warning word
[hex]
Extended status word
[hex]
Analog input 53
[V]
Analog input 60
[mA]
Three operating data items can be shown in the
first display line, and one operating variable can be
shown in the second display line. Is programmed via
parameters 009, 010, 011 and 012
Display readout
.
MG.90.F2.22 - VLT is a registered Danfoss trademark
95
