Danfoss VLT Decentral FCD 300, Manual

Page: 164 / 212

Decentral Solutions
505 Start
(START SELECT)
Value:
Digital input (DIGITAL INPUT) [0]
Serial port (SERIAL PORT) [1]
Logic and (LOGIC AND) [2]
✭
Logic or (LOGIC OR) [3]
Function:
See function description for parameter 502
Coasting stop.
Description of choice:
The table below shows when the motor has stopped
and when the variable frequency drive has a start
command when each of the following is selected: Digital
input [0], Serial port [1], Logic and [2] or Logic or [3].
Digital input [0]
Dig. input Ser. port Function
0 0 Stop
0 1 Stop
1 0 Start
1 1 Start
Serial port [1]
Dig. input Ser. port Function
0 0 Stop
0 1 Start
1 0 Stop
1 1 Start
Logic and [2]
Dig. input Ser. port Function
0 0 Stop
0 1 Stop
1 0 Stop
1 1 Start
Logic or [3]
Dig. input Ser. port Function
0 0 Stop
0 1 Start
1 0 Start
1 1 Start
506 Reverse
(REVERSE SELECT)
Value:
Digital input (DIGITAL INPUT) [0]
Serial port (SERIAL PORT) [1]
Logic and (LOGIC AND) [2]
✭
Logic or (LOGIC OR) [3]
Function:
See function description for parameter 502
Coasting stop.
Description of choice:
The table below shows when the motor is running
clockwise and counter-clockwise when each of
the following is selected: Digital input [0], Serial
port [1], Logic and [2] or Logic or [3].
Digital input [0]
Dig. input Ser. port Function
0 0 Clockwise
0 1 Clockwise
1 0 Counter-clockwise
1 1 Counter-clockwise
Serial port [1]
Dig. input Ser. port Function
0 0 Clockwise
0 1 Counter-clockwise
1 0 Clockwise
1 1 Counter-clockwise
Logic and [2]
Dig. input Ser. port Function
0 0 Clockwise
0 1 Clockwise
1 0 Clockwise
1 1 Counter-clockwise
Logic or [3]
Dig. input Ser. port Function
0 0 Clockwise
0 1 Counter-clockwise
1 0 Counter-clockwise
1 1 Counter-clockwise
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.90.F2.22 - VLT is a registered Danfoss trademark
164