Danfoss VACON NXP FI10, Operating Manual

Page: 6 / 172

8.7.8.3 Fan Control 78
8.7.8.4 Changing the Fan Control Settings 79
8.7.8.5 HMI Acknowledge Timeout (P6.7.3) 79
8.7.8.6 Changing the HMI Acknowledge Timeout 79
8.7.8.7 Changing the Number of Retries to Receive HMI Acknowledgement (P6.7.4) 80
8.7.8.8 Sine Filter (P6.7.5) 80
8.7.8.9 Pre-charge Mode (P6.7.6) 80
8.7.9 System Info 80
8.7.9.1 Finding the System Info Menu 80
8.7.9.2 Total Counters (S6.8.1) 80
8.7.9.3 Trip Counters (S6.8.2) 81
8.7.9.4 Resetting the Trip Counters 81
8.7.9.5 Software (S6.8.3) 81
8.7.9.6 Applications (S6.8.4) 82
8.7.9.7 Examining the Application Page 82
8.7.9.8 Hardware (S6.8.5) 82
8.7.9.9 Checking the Status of an Option Board 82
8.7.9.10 Debug Menu (S6.8.7) 83
8.8 Using the Expander Board Menu 83
8.8.1 Expander Board Menu 83
8.8.2 Examining the Connected Option Boards 83
8.8.3 Finding the Option Board Parameters 84
8.9 Further Control Panel Functions 84
9 Commissioning 85
9.1 Safety Checks before Starting the Commissioning 85
9.2 Commissioning the Inverter 86
9.3 Measuring the Cable and Motor Insulation 86
9.3.1 Insulation Checks of the Motor Cable 87
9.3.2 Insulation Checks of the DC Supply Cable 87
9.3.3 Insulation Checks of the Motor 87
9.4 Testing the Inverter after Commissioning 88
9.5 RUN Test without Load 88
9.6 Start-up Test 88
9.7 Motor Run Checklist 89
10 Maintenance 90
10.1 Maintenance Schedule 90
10.2 Reforming the Capacitors 90
11 Fault Tracing 93
11.1 General Information on Fault Tracing 93
11.2 Resetting a Fault 93
Contents Operating Guide | VACON® NXI Inverters FI9-FI14
AQ304441431479en-000101 / 6 | Danfoss A/S © 2019.11