Troubleshooting
Do a check of the reason for the Run enable signal.
12.10.132 Fault 63 - Quick stop
Cause
Command for quick stop received from digital input or fieldbus.
This fault is type A fault (Alarm).
Troubleshooting
Reset the fault.
12.10.133 Fault 64 - Input switch open
Cause
Drive input switch is open.
This fault is type A fault (Alarm)
Troubleshooting
Do a check of the main power switch of the drive.
12.10.134 Fault 65 - Measured Temperature
Cause
Shows temperature measurement fault for option board OPTBH or OPTB8.
•
Temperature exceeded set limit.
•
Sensor disconnected.
•
Short circuit.
Troubleshooting
Find the cause of temperature rise or sensor malfunction.
12.10.135 Fault 70 - Active filter fault
Cause
Fault triggered by digital input (see param. P2.2.7.33).
It is possible to set different responses in the application for this fault. See parameter group Protections.
Specifications
Operating Guide | VACON® NXI Inverters FI9-FI14
AQ304441431479en-000101 / DPD00909
166 | Danfoss A/S © 2019.11
Summary of Contents for VACON NXP FI10
Page 1: ...Operating Guide VACON NXI Inverters FI9 FI14...
Page 2: ......
