Danfoss VACON NXP FI10, Operating Manual

Page: 132 / 172

Enclosure size I
N
(output) Motor cos I
DC
(input)
FI14 1770 0.92 2132
2150 0.92 2590
2700 0.92 3252
12.9 DC Currents, Supply Voltage 640–1100 V DC
Table 30: DC Currents of VACON
®
NX, Supply Voltage 640–1100 V DC
Enclosure size I
N
(output) Motor cos I
DC
(input)
FI9 125 0.89 146
144 0.89 168
170 0.89 198
208 0.9 245
FI10 261 0.9 308
325 0.9 383
385 0.9 454
416 0.9 490
FI12 460 0.91 548
502 0.91 598
590 0.91 703
650 0.91 774
750 0.91 894
820 0.91 977
FI13 920 0.91 1096
1030 0.91 1227
1180 0.92 1421
FI14 1500 0.92 1807
1900 0.93 2313
2250 0.93 2739
12.10 Faults and Alarms
12.10.1 Fault 1 - Overcurrent, Subcode S1- Hardware trip
Cause
There is too high a current in the motor cable. Its cause can be 1 of the following:
Specifications
Operating Guide | VACON® NXI Inverters FI9-FI14
AQ304441431479en-000101 / DPD00909
132 | Danfoss A/S © 2019.11