12.10.127 Fault 58 - Brake
Cause
Actual status of the brake is different from the control signal.
It is possible to set different responses in the application for this fault. See parameter group Protections.
Troubleshooting
Do a check of the mechanical brake state and connections.
12.10.128 Fault 59 - Follower communication
Cause
SystemBus or CAN communication is broken between Master and Follower.
Troubleshooting
•
Do a check of the option board parameters.
•
Do a check of the optical fiber cable or CAN cable.
12.10.129 Fault 60 - Cooling
Cause
External cooling has failed.
Normally this fault comes from the heat exchanger unit.
Troubleshooting
Do a check of the reason for the failure on the external system.
12.10.130 Fault 61 - Speed error
Cause
Motor speed is unequal to reference.
Troubleshooting
•
Do a check of the encoder connection.
•
PMS motor has exceeded the pull-out torque.
12.10.131 Fault 62 - Run disable
Cause
Run enable signal is low.
Specifications
Operating Guide | VACON® NXI Inverters FI9-FI14
AQ304441431479en-000101 / DPD00909| 165
Danfoss A/S © 2019.11
Summary of Contents for VACON NXP FI10
Page 1: ...Operating Guide VACON NXI Inverters FI9 FI14...
Page 2: ......
