Danfoss AK2-SC 255, Reference Manual, Page: 97 / 206

96 AK2-SC 255 Reference Manual RS.8D.M1.22
until the temperature reaches 70.
Ambient temp lockout: (List box: Yes, No) Whether or not there is to be a
lockout based on low ambient temperature.
No cooling below (0.0 to 100.0) The ambient temperature below which
cooling will be locked out.
Range +/- (0.0 to 9.9) The range for the lockout. Cooling will be
locked out at lockout minus range, and when locked out
will be allowed on at lockout plus range.
Minimum run time (0 to 20) The number of minutes that a stage must run
before being turned off.
Delay between stages (0 to 20) The number of minutes that must elapse
after a stage is turned on before the next stage can be
turned on.
SC4 heating
configuration
No of zone sensors (0 to 5) The number of zone temperature sensors.
Controlling sensor (List box:)
Min Temp: Control will be based on the lowest value
of all of the zone temperature sensors.
Max Temp: Control will be based on the highest
value of all of the zone temperature sensors.
Average: Control will be based on the average of all
the zone temperature sensors.
Zone Temp 4-1 (etc.): (each zone temperature
sensor will be available as a choice in the list) Control
will be based on the single selected sensor.
Num of ht rclm stages (0 to 4) The number of heat reclaim stages in the SC4
unit.
Setpoint (0.0 to 100.0) The desired temperature at the control-
ling sensor when heat reclaim is being used.
Range +/- (0.0 to 9.9) The range selected creates a dead band.