Danfoss AK2-SC 255, Reference Manual, Page: 57 / 206

56 AK2-SC 255 Reference Manual RS.8D.M1.22
Board & Points
Variable outputs
(Analog outputs)
Name (Label field; any 15 characters) The name of the load
being driven by the variable output. The default names
for the variable outputs automatically added during
configuration of refrigeration are shown, and will
suffice in many applications. They can be edited
character by character (put the cursor on the field,
press +/- to enter edit mode; then use the left and right
arrow keys to move from space to space and the up
and down arrow keys to select the character for that
space. When the name appears as you want it, press
ENTER).
Bd-Pt Enter the Bd-Pt address to which the load is wired.
Range (List box; two variable output ranges are available,
depending on the drive requirements:)
0-10 Volts
0-5 Volts
SORT At the bottom of the body of the screen (above the
icons, on the same line as “PG DN” for more is the
SORT field. By default, sort mode is on, and entries
will be sorted by Bd-Pt address; if sort mode is turned
off, points will be listed from then on in the order in
which they were created. The sorting occurs when you
press EXIT and will be apparent the next time you
enter the screen.
Board & Points
Other controllers When you select the “Other Controllers” icon and press ENTER, a menu is presented
that allows selection of any of six types of other controllers that can be nodes on the
control system I/O network.