Danfoss AK2-SC 255, Reference Manual, Page: 76 / 206

RS.8D.M1.22 AK2-SC 255 Reference Manual 75
during dehumidification.
Monitor outside humidity (List box: Yes, No) Whether or not to monitor outside
humidity on status screens for this RTU.
Monitor wheel rotation (List box: Yes, No) (Present only when dessicant
wheel is configured) Whether or not the dehumidifica-
tion target is to be raised by an offset (next line)
Night setback (List box: Yes, No) Whether or not the dehumidifica-
tion target is to be raised by an offset (next line)
according to a schedule or schedules on the next
page(s).
Night setback offset (0.0 to 100.0) The amount by which the dehumidifica-
tion setpoint (set on previous page) is to be raised
during night setback hours (as set on the following
schedule page).
Num of schedules (0 to 8) The number of night setback schedules
desired on the following schedule page(s).
RTU Air Damper
configuration
For air damper configuration, select Air Damper from the Configure RTU menu.
Air Damper (List box: Yes, No) Whether or not there is a con-
trolled air damper.
Ambient temp lockout (List box: Yes, No) Whether or not the air damper is to
be locked out based on ambient temperatuare.
No air damper below (0.0 to 100.0) The air damper will be locked out below
this temperature minus range (next line). The air
damper will be allowed to open again again when
ambient temperature has risen to lockout plus range.
Range +/- (0.0 to 9.9) The range selected creates a dead band
around the lockout temperature. The air damper will
be locked out at lockout temperature minus range, and
once locked out will be allowed to open at ambient
lockout plus range.
Num of schedules (0 to 8) The number of schedules that will be created
(below, and on following pages if needed) for air