Danfoss AK2-SC 255, Reference Manual, Page: 63 / 206

62 AK2-SC 255 Reference Manual RS.8D.M1.22
The fields and contents are:
Name (Label field: any 15 characters) The name of the
compressor being controlled by the VLT. The default
names for the system’s VLTs that were automatically
added during configuration of refrigeration are shown,
and will suffice in many applications. They can be
edited character by character (put the cursor on the
field, press +/- to change to edit mode; then use the left
and right arrow keys to move from space to space and
the up and down arrow keys to select the character for
that space. When the name appears as you want it,
press ENTER).
Locate (Button field) Each VLT must be located by the SC
255. Place the cursor on the Locate field and press
ENTER. Then, when instructed by a pop-up box on the
SC 255 screen, go to the VLT and press the service
pin. The SC 255 will then read the VLT address, which
will appear on the screen to the right of the Locate
field.
DCU circuits
Board & Points
Section to be added.