manualshive.com logo in svg

Daikin Super Multi Plus D-Series, Service Manual

The Daikin Super Multi Plus D-Series is a versatile and efficient multi-split air conditioning system. For comprehensive information on installation, maintenance, and troubleshooting, download the free Service Manual from manualshive.com. Get all the essential details you need in one convenient manual for optimal performance of your Daikin system.

Share
Download
background image

SiEBE18-526

Troubleshooting

239

Part 8

Troubleshooting

1. Caution for Diagnosis..........................................................................241

1.1

Troubleshooting with the Operation Lamp (RA Indoor Unit) ................241

1.2

Troubleshooting with the LED on the SkyAir Indoor Unit .....................242

1.3

Troubleshooting with the LED on the Outdoor Unit..............................243

1.4

Troubleshooting with the LED on the BP Unit ......................................244

2. Service Check Function ......................................................................245

2.1

RA Indoor Unit Wireless Remote Controller.........................................245

2.2

SkyAir Indoor Unit INSPECTION/TEST Button....................................248

2.3

SkyAir Indoor Unit Wired Remote Controller........................................249

2.4

SkyAir Indoor Unit Wireless Remote Controller ...................................250

2.5

Sky Air Indoor Unit Error Codes and LED Indication............................252

2.6

Malfunction Code Indication by Outdoor Unit PCB ..............................253

3. List of Malfunction Code......................................................................255
4. Troubleshooting for RA Indoor Unit.....................................................257

4.1

Indoor Unit PCB Abnormality ...............................................................257

4.2

Freeze-up Protection Control or High Pressure Control.......................258

4.3

Fan Motor or Related Abnormality .......................................................260

4.4

Thermistor or Related Abnormality (Indoor Unit)..................................263

4.5

Shutter Drive Motor / Shutter Limit Switch Abnormality .......................264

4.6

Check ...................................................................................................265

5. Troubleshooting for SkyAir Indoor Unit ...............................................268

5.1

Indoor Unit PCB Abnormality ...............................................................268

5.2

Malfunction of Drain Water Level System (Float Type) ........................269

5.3

Malfunction of Drain System ................................................................271

5.4

Indoor Unit Fan Motor Lock..................................................................272

5.5

Malfunction of Indoor Unit Fan Motor ...................................................273

5.6

Swing Flap Motor Malfunction / Lock ...................................................275

5.7

Malfunction of Capacity Setting............................................................277

5.8

Malfunction of Heat Exchanger Thermistor (R2T)................................278

5.9

Malfunction of Heat Exchanger Thermistor (R3T)................................279

5.10 Malfunction of Suction Air Thermistor ..................................................280
5.11 Malfunction of Remote Controller Thermistor.......................................281
5.12 Transmission Error (between Indoor Unit and Remote Controller) ......282
5.13 Transmission Error (between Main and Sub Remote Controller).........283
5.14 Malfunction of Field Setting Switch ......................................................284
5.15 Check ...................................................................................................285

6. Troubleshooting for BP Unit ................................................................287

6.1

Malfunction of Electronic Expansion Valve ..........................................287

6.2

Faulty BP Unit PCB ..............................................................................288

6.3

Faulty BP Liquid or Gas Pipe Thermistor .............................................289

6.4

Transmission Error between Indoor Unit and BP Unit..........................290

6.5

Transmission Error between Outdoor Unit and BP Unit.......................292

6.6

Check ...................................................................................................293

7. Troubleshooting for Outdoor Unit........................................................294

7.1

Faulty Outdoor Unit PCB......................................................................294

Summary of Contents for Super Multi Plus D-Series












































































































































































































































































































































































































Reviews:

No comments

Related manuals for Super Multi Plus D-Series

Gardena 7000 Operator'S Manual preview
7000
Brand: Gardena Pages: 13
WarmFlow A Series User Instructions preview
A Series
Brand: WarmFlow Pages: 89
Fabbri Termomeccanica F85 Technical Manualbook preview
F85
Brand: Fabbri Termomeccanica Pages: 35
Danfoss Heat Pump Troubleshooting Manual preview
Heat Pump
Brand: Danfoss Pages: 34
Danfoss DHP-H Installation Instructions Manual preview
DHP-H
Brand: Danfoss Pages: 52
YAMADA DP Series Quick Manual preview
DP Series
Brand: YAMADA Pages: 84
SAER Elettropompe CB Series Use And Maintenance Manual preview
CB Series
Brand: SAER Elettropompe Pages: 16
Walrus TQ Series Instruction Manual preview
TQ Series
Brand: Walrus Pages: 6
wallas 26CC Installation Manual preview
26CC
Brand: wallas Pages: 124
wallas Nautic 40D Technical Details preview
Nautic 40D
Brand: wallas Pages: 36
Walrus TPK Series Instruction Manual preview
TPK Series
Brand: Walrus Pages: 4
Underhill GULP PRO Care And Maintenance Instructions preview
GULP PRO
Brand: Underhill Pages: 2
SereneLife SLBSMPMP100 Manual preview
SLBSMPMP100
Brand: SereneLife Pages: 10
VTS Medical Systems WING C100-200 Technical Documentation Manual preview
WING C100-200
Brand: VTS Medical Systems Pages: 23
Bard WH423D Installation Instructions Manual preview
WH423D
Brand: Bard Pages: 26
Harbor Freight Tools 90553 Operating Instructions Manual preview
90553
Brand: Harbor Freight Tools Pages: 10
Idex Trebor REV6 Operation & Maintenance Manual preview
Trebor REV6
Brand: Idex Pages: 40
Neilsen CT5308 Quick Start Manual preview
CT5308
Brand: Neilsen Pages: 8

Brands by name

Popular brands

Load more brands