SiEBE18-526
Instruction
System Configuration
211
2.2.15 Troubleshooting
Trouble Shooting
These cases are not troubles.
The following cases are not air conditioner troubles but have some reasons. You may just continue using it.
Case
Explanation
Operation does not start soon.
• When ON/OFF button was
pressed soon after operation
was stopped.
• When the mode was
reselected.
Hot air does not flow out soon
after the start of heating
operation.
The heating operation stops
suddenly and a flowing sound
is heard.
The outdoor unit emits water or
steam.
Mists come out of the indoor
unit.
The indoor unit gives out odour.
The outdoor fan rotates while
the air conditioner is not in
operation.
The operation stopped
suddenly.
(OPERATION lamp is on)
• This is to protect the air conditioner.
You should wait for about 3 minutes.
• The air conditioner is warming up. You should wait for 1 to 4
minutes.
(The
system is designed to start discharging air only after it
has reached a certain temperature.)
• The system is taking away the frost on the outdoor unit.
You should wait for about 3 to 8 minutes.
In HEAT mode
•
The
frost on the outdoor unit melts into water or steam
when the air conditioner is in defrost operation.
In COOL or DRY mode
•
Moisture in the air condenses into water on the cool
surface of outdoor unit piping and drips.
This happens when the air in the room is cooled into mist by
the cold air flow during cooling operation.
This happens when smells of the room, furniture, or
cigarettes are absorbed into the unit and discharged with the
air flow.
(If
this happens, we recommend you to have the indoor unit
washed by a technician. Consult the service shop where you
bought the air conditioner.)
After operation is stopped:
•
The
outdoor fan continues rotating for another 60
seconds for system protection.
While the air conditioner is not in operation:
•
When
the
outdoor temperature is very high, the out door
fan starts rotating for system protection.
For system protection, the air conditioner may stop
operating on a sudden large voltage fluctuation.
It
automatically resumes operation in about 3 minutes.
Summary of Contents for Super Multi Plus D-Series
Page 1: ...SiEBE18 526 D Series Service Manual Applied Models zSuper Multi Plus Heat Pump...
Page 12: ...SiEBE18 526 List of Functions 1 Part 1 List of Functions 1 List of Functions 2...
Page 63: ...Refrigerant Flow for Each Operation Mode SiEBE18 526 52 Refrigerant Circuit...
Page 249: ...Instruction SiEBE18 526 238 System Configuration...