Instruction
SiEBE18-526
154
System Configuration
20
21
22
19
18
Outdoor Unit
Indoor Unit
Outdoor Unit
1. Air filter
2. Air purifying filter with photocatalytic
deodorizing function:
•
These filters are attached to the inside of the air
filters.
3. Air inlet
4. Front grille
5. Grille tab
6. INTELLIGENT EYE sensor:
•
It detects the movements of people and
automatically switches between normal operation
and energy saving operation.
7. Display
8. Air outlet
9. Flap (horizontal blade)
10. Louvers (vertical blades):
•
The
Louvers are inside of the air outlet.
11. Operation lamp (green)
12. TIMER lamp (yellow)
13. HOME LEAVE lamp (red):
•
Lights up when you use HOME LEAVE
Operation.
14. Indoor Unit ON/OFF switch:
•
Push this switch once to start operation.
Push once again to stop it.
•
The operation mode refer to the following table.
•
This switch is useful when the remote control is
missing.
15. Packaging materials:
50 class only
•
If any packaging materials are included, please
remove before operating.
16. Room temperature sensor:
•
It senses the air temperature around the unit.
17. Signal receiver:
•
It receives signals from the remote control.
•
When the unit receives a signal, you will hear a
short beep.
•
Operation start .............. beep-beep
•
Settings changed........... beep
•
Operation stop............... beeeeep
AUTO
AUTO
AUTO
COOL
Mode
Temperature
setting
Air flow
rate
22
°
C
25
°
C
FTXS
FTKS
18. Air inlet:
(Back and side)
19. Air outlet
20. Refrigerant piping and inter-unit cable
21. Drain hose
22. Earth terminal:
•
It
is inside of this cover.
Appearance of the outdoor unit may differ from some models.
Summary of Contents for Super Multi Plus D-Series
Page 1: ...SiEBE18 526 D Series Service Manual Applied Models zSuper Multi Plus Heat Pump...
Page 12: ...SiEBE18 526 List of Functions 1 Part 1 List of Functions 1 List of Functions 2...
Page 63: ...Refrigerant Flow for Each Operation Mode SiEBE18 526 52 Refrigerant Circuit...
Page 249: ...Instruction SiEBE18 526 238 System Configuration...
