![background image](http://html.mh-extra.com/html/daikin/2mks40g2v1b/2mks40g2v1b_service-manual_501075135.webp)
SiBE12-816_D
RA Indoor Unit
Operation Manual
124
Indoor Unit
1. Air filter
3. Air inlet
4. Front panel
5. Panel tab
6. Room temperature sensor:
•
7. INTELLIGENT EYE sensor
8. Display
9. Air outlet
10. Horizontal blades (flaps)
11. Vertical blades (louvers):
• The louvers are inside of the air outlet.
12. Indoor Unit ON/OFF switch
Model
Mode
COOL
22˚C
AUTO
AUTO
25˚C
AUTO
2. Titanium Apatite Photocatalytic
Air-Purifying Filter:
• These filters are attached to the inside
of the air filters.
It senses the air temperature around the
unit.
Temperature
setting
Airflow
rate
COOLING
ONLY
HEAT
PUMP
• This switch is useful when the
remote controller is missing.
• It receives signals from the remote controller.
• When the unit receives a signal, you will hear
a short beep.
• Operation start ........beep-beep
• Settings changed .....beep
• Operation stop..........beeeeep
• Push this switch once to start operation.
Push once again to stop it.
• The operation mode refers to the following
table.
13. Operation lamp (green)
14. TIMER lamp (yellow)
15. INTELLIGENT EYE lamp (green)
16. Signal receiver: