![background image](http://html.mh-extra.com/html/daikin/2mks40g2v1b/2mks40g2v1b_service-manual_501075153.webp)
SiBE12-816_D
RA Indoor Unit
Operation Manual
142
To use ON TIMER
operation
1. Press “ON TIMER button”.
is displayed.
blinks.
2.
3.
4. Press “CANCEL button”.
To combine ON TIMER and OFF TIMER
ATTENTION
In the following cases, set the timer again.
1, 3
4
2
(Example)
Combined
Press “SELECT button” until
the time setting reaches the
point you like.
Press “ON TIMER button”
again.
To cancel ON TIMER
operation
• Check that the clock is correct. If not, set
the clock to the present time.
• Every pressing of either button
increases or decreases the time setting
by 10 minutes. Holding down either
button changes the setting rapidly.
• The TIMER lamp lights up.
• The TIMER lamp goes off.
• A sample setting for combining the two timers is shown below.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote controller.
Present time: 23:00
(The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00