Daikin 2MKS40FV1B Service Manual Download Page 105

Page: 105 / 206

Instruction

SiEN12-710A

Operation Manual

CDXS 25/35 E

CAUTION

• Only a qualified service person is allowed to perform maintenance.
• Before cleaning, be sure to stop the operation and turn the breaker OFF.

Cleaning the air filter

1. Removing the air filter

•

Rear suction
Pull the bottom side of the air filter backwards, over the bends.

•

Bottom suction
Pull the filter over the bends situated at the backside of the unit.

2. Cleaning the air filter.

•

Remove dust from the air filter using a
vacuum cleaner and gently rinse them in cool
water. Do not use detergent or hot water to
avoid filter shrinking or deformation. After
cleaning dry them in the shade.

3. Replacing the air filter

•

Rear suction
Hook the filter behind the flap situated at the top of the unit and push the other side gently over
the bends.

•

Bottom suction
Hook the filter behind the flap situated at the middle of the unit and push the other side gently
over the bends

In case of bottom side

Main unit

Filter

Force

Attach the filter to the
main unit while
pushing down on the
bends.

In case of back side

Summary of Contents for 2MKS40FV1B















































































































































































































Search results

Summary of Contents for 2MKS40FV1B

Reviews:

Brands by name

Popular brands

Daikin 2MKS40FV1B, Service Manual

Search results

Summary of Contents for 2MKS40FV1B

Reviews:

Brands by name

Popular brands