User's Manual
353
Table 5-71 Register parameters
Function
Description
Server Address
Enter the IP address or domain name of the server that you want to
register to.
Port
Enter the port of the server.
Sub-Device ID
Enter the ID allocated by the server.
Step 4
Click
Apply
.
5.11.17 Switch
Background Information
After setting
Switch
, when an IPC is connected to the PoE port, the system automatically assigns the
IP address to the IPC according to the defined IP segment, and the NVR will automatically connect to
the IPC.
●
Only models with PoE ports support this function.
●
Do not connect the PoE port with a switch, otherwise it will cause connection failure.
●
This function is enabled by default, and the IP segment start from 10.1.1.1. We recommend you
use the default setting.
●
When connecting to a third-party IPC, make sure that the IPC supports ONVIF protocol and DHCP
is enabled.
Procedure
Step 1
Select
Main Menu
>
NETWORK
>
Switch
.
Figure 5-240 Switch
Step 2
Configure IP address, subnet mask, and default gateway..
Summary of Contents for NVR21-4KS3 Series
