Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Page: 267 / 473

Operation Manual
19
Figure 6-6 Exposure
Step 2 Configure exposure parameters.
Table 6-3 Description of exposure parameters
Parameter Description
Anti-flicker
You can select from 50 Hz, 60 Hz and Outdoor.
●
50 Hz: When the electric supply is 50 Hz, the system adjusts the
exposure according to ambient light automatically to ensure that
no stripe appears.
●
60 Hz: When the electric supply is 60 Hz, the system adjusts the
exposure according to ambient light automatically to ensure that
no stripe appears.
●
Outdoor: You can select any exposure mode as needed.
Mode
Device exposure modes.
●
Auto: Adjusts the image brightness according to the actual
condition automatically.
●
Gain Priority: When the exposure range is normal, the system
prefers the configured gain range when auto adjusting according
to the ambient lighting condition. If the image brightness is not
enough and the gain has reached upper or lower limit, the system
adjusts shutter value automatically to ensure the image at ideal
brightness. You can configure gain range to adjust gain level when
using gain priority mode.
●
Shutter priority: When the exposure range is normal, the system
prefers the configured shutter range when auto adjusting
according to the ambient lighting condition. If the image
brightness is not enough and the shutter value has reached upper
or lower limit, the system adjusts gain value automatically to
ensure the image at ideal brightness.
●
Manual: Configure gain and shutter value manually to adjust image
brightness.
When the Anti-flicker is set to Outdoor , you can select Auto , Gain
priority , Shutter priority or Manual in the Mode list.