Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Page: 387 / 473

Operation Manual
139
Figure 8-34 Picture (non-motor vehicle)
3) Click Apply .
Step 6 (Optional) Click the icons at the right side of the image to filter targets in the image.
●
Click to draw rule line in the image.
When targets pass the tripwire along the configured direction line, they will be
counted.
●
After the rule is enabled, the detection area is displayed. Click , and you drag the any
corner of the box to adjust the size of the area, and press the left mouse button and
move the box to adjust the position.
●
Click to draw an area exclusion area for face detection in the image, and right-click
to finish the drawing..
●
Click to draw the minimum size of the target, and click to draw the maximum
size of the target. Only when the target size is between the maximum size and the
minimum size, can the alarm be triggered.
●
Click , and then press and hold the left mouse button to draw a rectangle, the pixel
size is displayed.
●
Click to delete the detection line.
Step 7 Set parameters.
Table 8-15 Description of crowd map parameters
Parameter Description
People Flow Statistics
Click next to People Flow Statistics to count the number of
people in the detection area.
Flow Statistics (Non-motor
Vehicle)
Click next to Flow Statistics (Non-motor Vehicle) to count
the number of non-motor vehicles in the detection area.
Traffic Flow Stat
Click next to Traffic Flow Statistics to count the number of
motor vehicles in the detection area.
OSD
Click OSD Info , and the Overlay page is displayed. Click
next to Enable to enable the target statistics function. For details,
see "6.2.2.2.8 Configuring Target Statistics".